INTRODUCTION

This analysis covers the 2017 Audi Q7 quattro Premium Plus, a midsize luxury SUV with all-wheel drive. The report is derived directly from the VIN decode data for WA1LAAF78HD004316, providing an objective overview of specifications, condition indicators, reliability factors, and maintenance requirements.

VEHICLE SPECIFICATIONS

Key Technical Specifications
  • Make: Audi
  • Model: Q7
  • Model Year: 2017
  • Trim: quattro Premium Plus
  • Body Class: Sport Utility Vehicle (SUV)/Multipurpose Vehicle (MPV)
  • Drive Type: AWD/All-Wheel Drive
  • Engine: 3.0L V6, 333 hp
  • Fuel Type: Gasoline
  • Transmission: 8-Speed Automatic (inferred from model)
  • Doors: 4
  • Seats: 7
  • Plant Country: Slovakia
  • ABS: Standard
  • ESC: Standard
  • Blind Spot Warning: Standard
  • Backup Camera: Standard

CONDITION ASSESSMENT

With no auction records available, condition assessment relies on the VIN data and typical expectations for a 2017 Audi Q7. The vehicle features standard safety systems including ABS, ESC, and blind-spot monitoring. At seven-plus years old, examples of this generation commonly show mileage between 60,000–120,000 miles, with wear primarily on suspension components, electronics, and interior trim. The 3.0L supercharged V6 and quattro drivetrain are generally robust when serviced, though air suspension (if equipped) and electronic modules can require attention.

RELIABILITY & COMMON ISSUES

The 2017 Audi Q7 with the 3.0L V6 (CREC/CREC variant) is known for strong performance but requires diligent maintenance. Common issues include carbon buildup on intake valves, supercharger seal leaks, and occasional transmission mechatronics faults. Suspension air springs and adaptive dampers can fail around 80,000–100,000 miles, with repair costs ranging from $1,200–$3,500. Electrical gremlins in the MMI system and occasional oil consumption are also reported. For deeper analysis of the specific engine and transmission, use the site tools: Engine Q&A / engine analysis form and Transmission Q&A / transmission analysis form. Enter the engine code and transmission type from this VIN report for detailed reliability and repair estimates.

MAINTENANCE REGULATIONS (РЕГЛАМЕНТИ)

Recommended Consumables and Service Intervals
Consumable / part Replacement interval Notes OEM part numbers and common aftermarket analogs
Engine oil Every 10,000 miles / 12 months Capacity ~6.5 qt; use VW 502.00 spec 5W-30 synthetic OEM: 06M 115 562; analogs: Mobil 1 ESP 5W-30, Castrol Edge 5W-30
Engine oil filter Every 10,000 miles (with oil) OEM-style cartridge filter; replace with every oil change OEM: 06M 115 562; analogs: Mann HU 719/6 x, Bosch 3323
Transmission fluid Every 60,000 miles Use VW G 055 540 A2 fluid; ~9 qt total fill OEM: G 055 540 A2; analogs: Pentosin ATF 8, Febi 34608
Cabin filter Every 20,000 miles / 24 months Activated charcoal type recommended for odor control OEM: 4M0 819 439; analogs: Mann CU 2939, Bosch 6055C
Coolant Every 80,000 miles / 5 years Use G13 coolant; 50/50 mix with distilled water OEM: G 013 A8J M1; analogs: Pentosin SF, Zerex G-05
Brake fluid Every 40,000 miles / 3 years DOT 4 LV spec; flush and refill completely OEM: B 000 750 M3; analogs: ATE TYP 200, Pentosin DOT 4 LV
Spark plugs Every 60,000 miles Iridium plugs; gap 0.028–0.031 in OEM: 06M 905 601 C; analogs: NGK 94558, Denso 3478
Timing chain Lifetime (inspect at 100k miles) Chain-driven; no scheduled replacement but check for stretch N/A (chain); inspect tensioner and guides at major service